Installation instructions for FIXED Deflector Series 26
The installation of an air deflector must be carried out by a qualified person.
Thorough preparation is essential before installation.
1
Present the product on the vehicle to ensure the correct position.
2
Degrease the bonding surfaces and apply the adhesion primer.
3
Extrude a bead of adhesive with a diameter of 8 mm on the bonding area of the deflector.
- Leave a 1 cm gap without adhesive at the front right and left to allow for water drainage.
4
Place the product on the vehicle’s roof and apply pressure firmly.
5
Create an external seal for better waterproofing.
Drying
Allow polymerization for one night or 10 hours before driving.
Under no circumstances can NOVIPLAST be held responsible for any technical or aesthetic modifications to the products.
Pour toutes demandes spéciales merci de contacter le service technique.